Tips On Creating Your Own Silicone Mold For Different Resins

Tips On Creating Your Own Silicone Mold For Different Resins

Are you planning to create a DIY silicone mold? Well, it is definitely easy but you need to know certain things first. Before starting your DIY silicone mold, you need to make sure that you are ready to deal with all the challenges it will bring. Basically, it is like building your own clay doll. You have to start from scratch in order to achieve a great result.

Make your Own Silicone Mold - Step by Step Guide. In this article, you are going to learn how to create your very own personal silicone mold by simply following a step-by-step guide. But what if you do not have the right molds for the project yet and they aren't easily available in the market? In this article, you are going to learn how to create your very own personal silicone mold using a proper mixing ratio.

First, cut open your choice of mold. Make sure to clean and dry the area completely and then carefully remove any residual glue that is left over from the previous molding process. Then, take out your choice of materials. For this purpose, it is better to use a long spoon to gently scoop the resin granules from its plastic package.

In order to keep the material inside the mold without bubbles, you should pour a little silicone caulk into the container. As a matter of fact, silicone caulk is enough to cover the entire container so that there will be no leaks. In addition to silicone caulk, you should also pour in some water to keep the material from drying out. Now, you should proceed with the next process of your DIY silicone mold making. In this case, you have to pour the hot silicone caulk into the mold cavity. Make sure to spread it evenly otherwise bubbles will occur in the material.

After that, you have to add your choice of color or consistency in the form of powder or sand. For example, you can choose between sand-powders, silica sand and puddles. You should keep in mind that the color you choose should be translucent enough to fit perfectly in the silicone mold material. The mixing process is going to begin now. The first step is to start mixing the turpentine until you reach the desired consistency. Then, take your hand and slowly mix the turpentine into the silicone mold mixture.

The last step is to let it dry and then cast the resin. As a matter of fact, you should do it in three to five minute intervals. The final step is to pour in your desired color and shape into the mold so that you get the best choice of bubbles for your DIY silicone mold creation. Just make sure that your mixture fits perfectly in the cavities and it doesn't spread all over the material because it can be a bad thing for the finished product.

Tags:small cake mold | silicone lollipop mold | cake mold silicone